AT89975
AcoustiTECH
AcoustiTECH LV Vinyl Acoustic Underlayment (300 sqft)
300 sqft roll
$277.90/ roll
Pickup at Markham showroom
Sound mat for click-LVP — condo-board grade acoustic rating.
How much do I need?
sq ft
Works with
Specs
| Category | Underlay & Acoustic Mats |
| Unit sold | 300 sqft roll |
| Coverage | ~300 sq ft per roll |
| Floor types | Vinyl Flooring |
| UPC | 779776006447 |
| Code | AT89975 |
How to use AcoustiTECH LV Vinyl Acoustic Underlayment (300 sqft)
- 1Roll the underlay out across the room, foam/pad side down, butting each roll edge to the next without overlapping (unless the product specifically calls for an overlap).
- 2Tape the seams if the roll doesn’t already have a built-in adhesive strip.
- 3Trim it to the wall lines — your baseboard or shoe moulding will cover the cut edge.
- 4Install your floating floor directly on top, working from one wall across the room.
- 5Never double up two pads under one floor unless the flooring manufacturer specifically allows it — pad-on-pad can feel spongy and void a flooring warranty.
Related supplies
FAQ
Can I use this underlay under vinyl plank flooring?
Only if your vinyl doesn’t already have a pad attached — most vinyl (SPC/LVP) sold today does, and doubling up (pad-on-pad) can feel spongy or void the flooring warranty. Check your plank spec, or ask us and we’ll confirm.
How much AcoustiTECH LV Vinyl Acoustic Underlayment (300 sqft) do I need?
Use the calculator on this page — enter your square footage and we’ll size the exact quantity, based on 1 roll covering about 300 sq ft.
Not sure which product you need?
Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.