DMX 1-Step 2.0 Underlayment (100 sqft)
The dimpled air-gap underlay for basements and concrete slabs — lifts laminate, click vinyl or engineered wood off the slab so moisture can evaporate instead of soaking into the floor. Built-in vapour barrier, thermal break and sound control in one layer.
Free pickup in Markham once it arrives (2–4 business days) · GTA delivery $140
Specs
| Category | Underlay & Acoustic Mats |
| Unit sold | 100 sqft roll (3.6' x 29') |
| Availability | Order-in from our supplier’s Ontario warehouse — usually 2–4 business days |
| Coverage | ~100 sq ft per roll |
| Floor types | Laminate Flooring, Vinyl Flooring, Engineered Hardwood |
| Code | DMX1-STEP2 |
How to use DMX 1-Step 2.0 Underlayment (100 sqft)
- 1Roll the underlay out across the room, foam/pad side down, butting each roll edge to the next without overlapping (unless the product specifically calls for an overlap).
- 2Tape the seams if the roll doesn’t already have a built-in adhesive strip.
- 3Trim it to the wall lines — your baseboard or shoe moulding will cover the cut edge.
- 4Install your floating floor directly on top, working from one wall across the room.
- 5Never double up two pads under one floor unless the flooring manufacturer specifically allows it — pad-on-pad can feel spongy and void a flooring warranty.
Related supplies
FAQ
Can I use this underlay under vinyl plank flooring?
Only if your vinyl doesn’t already have a pad attached — most vinyl (SPC/LVP) sold today does, and doubling up (pad-on-pad) can feel spongy or void the flooring warranty. Check your plank spec, or ask us and we’ll confirm.
How much DMX 1-Step 2.0 Underlayment (100 sqft) do I need?
Use the calculator on this page — enter your square footage and we’ll size the exact quantity, based on 1 roll covering about 100 sq ft.
Not sure which product you need?
Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.