Call or Text: (647) 428-1111
BBSFLOORING
AcoustiTECH AD-844 MS Urethane Hybrid Adhesive — 4 gal
AcoustiTECH

AcoustiTECH AD-844 MS Urethane Hybrid Adhesive

4 gal

Hybrid urethane adhesive for engineered and solid hardwood glue-downs, sold as a 4 gal pail.

$319.95/ gal
Order-in — usually 1–2 weeks

Free pickup in Markham once it arrives (1–2 weeks) · GTA delivery $140

Works with
Engineered HardwoodSolid Hardwood

Specs

CategoryAdhesives & Primers
Unit sold4 gal
AvailabilityOrder-in — usually 1–2 weeks
Floor typesEngineered Hardwood, Solid Hardwood
UPC779776001312
CodeAD844-15

How to use AcoustiTECH AD-844 MS Urethane Hybrid Adhesive

  1. 1Make sure the subfloor is clean, dry, flat and free of dust, old adhesive, paint or sealers before you open the pail.
  2. 2Spread with the trowel notch size printed on the pail or bucket label for your specific flooring type — that’s set by the manufacturer for a reason and shouldn’t be guessed.
  3. 3Follow the open time and set method (pressure-sensitive vs. wet-set) on the label — setting your flooring too early or too late is the single most common glue-down install mistake.
  4. 4Roll the finished floor with a floor roller to fully seat it and push out trapped air.
  5. 5Hold off on heavy furniture and appliances until the adhesive has fully cured per the label’s cure schedule.

Related supplies

Henry 630 PeachPro Glue-Down Vinyl Adhesive
Henry 630 PeachPro Glue-Down Vinyl Adhesive
from $94.00
2 options
Henry 695 High-RH Vinyl Flooring Adhesive
Henry 695 High-RH Vinyl Flooring Adhesive
from $23.20
3 options
Henry 647 PlumPro Roll-Apply Vinyl Flooring Adhesive
Henry 647 PlumPro Roll-Apply Vinyl Flooring Adhesive
from $101.60
2 options
Henry 422 Fortify Wet-Set Vinyl-Backed Flooring Adhesive
Henry 422 Fortify Wet-Set Vinyl-Backed Flooring Adhesive
from $94.00
2 options

FAQ

Do I need a primer before using AcoustiTECH AcoustiTECH AD-844 MS Urethane Hybrid Engineered Wood Adhesive 15 L?

On bare or porous concrete, yes — priming first lets the adhesive bond evenly instead of soaking in unevenly. On plywood or an already-sealed subfloor, a primer usually isn’t required. Check our Adhesives & Primers page for the matching primer.

Pressure-sensitive or wet-set — which method should I use?

Most modern flooring adhesives, including this one, can be used either way. Pressure-sensitive means you let the glue flash off until it’s tacky/clear before setting the flooring — more forgiving for DIY. Wet-set means you set the flooring directly into the wet adhesive — faster, but less room for repositioning. Follow the open-time window on the pail either way.

Not sure which product you need?

Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.

Try the supplies calculatorAsk about your project