Mapei Ultrabond ECO 907 Fast-Curing Silane-Modified Polymer Adhesive
A fast-curing silane-modified polymer adhesive in tube format, sized for smaller jobs and repairs.
Free pickup in Markham (ready next business day) · GTA delivery $140
Specs
| Category | Adhesives & Primers |
| Size options | 591 mL · 858 mL |
| Unit sold | 591 mL (591 mL) |
| Availability | Ready for Markham pickup next business day |
| Code | ECO907-591 |
Documents & Downloads
Official Mapei documents for Mapei Ultrabond ECO 907 Fast-Curing Silane-Modified Polymer Adhesive — the same warranty, installation and technical sheets our installers work from. PDFs open in a new tab.
- TDSMAPEI Ultrabond ECO 907 — Technical Data SheetEN · 5 pg · 1017 KBPDF
- Technical Data Sheet (1947956)EN · 4 pg · 857 KBPDF
- Technical Data Sheet (1947956)EN · 5 pg · 2.2 MBPDF
- Fiche Technique (1947956) (FR)Français · 4 pg · 735 KBPDF
- Fiche Technique (1947956) (FR)Français · 5 pg · 2.0 MBPDF
- SDSMAPEI Ultrabond ECO 907 — Safety Data SheetEN · 10 pg · 194 KBPDF
- Safety Data Sheet (1947956)EN · 8 pg · 171 KBPDF
- Safety Data Sheet (1947956)EN · 7 pg · 130 KBPDF
Show 4 more documents ↓Show fewer ↑
- Feuillet de sécurité (1947956) (FR)Français · 9 pg · 176 KBPDF
- CertCertification (1947956)EN · 4 pg · 143 KBPDF
- InfoInformation Document (1947956)EN · 2 pg · 347 KBPDF
- Document d'information (1947956) (FR)Français · 2 pg · 351 KBPDF
Need a document that isn't listed, or help reading a spec? Call (647) 428-1111 — we'll pull it from the manufacturer for you.
How to use Mapei Ultrabond ECO 907 Fast-Curing Silane-Modified Polymer Adhesive
- 1Make sure the subfloor is clean, dry, flat and free of dust, old adhesive, paint or sealers before you open the pail.
- 2Spread with the trowel notch size printed on the pail or bucket label for your specific flooring type — that’s set by the manufacturer for a reason and shouldn’t be guessed.
- 3Follow the open time and set method (pressure-sensitive vs. wet-set) on the label — setting your flooring too early or too late is the single most common glue-down install mistake.
- 4Roll the finished floor with a floor roller to fully seat it and push out trapped air.
- 5Hold off on heavy furniture and appliances until the adhesive has fully cured per the label’s cure schedule.
Related supplies
FAQ
Do I need a primer before using Mapei Mapei Ultrabond ECO 907 Fast-Curing Silane-Modified Polymer Adhesive - 591 mL?
On bare or porous concrete, yes — priming first lets the adhesive bond evenly instead of soaking in unevenly. On plywood or an already-sealed subfloor, a primer usually isn’t required. Check our Adhesives & Primers page for the matching primer.
Pressure-sensitive or wet-set — which method should I use?
Most modern flooring adhesives, including this one, can be used either way. Pressure-sensitive means you let the glue flash off until it’s tacky/clear before setting the flooring — more forgiving for DIY. Wet-set means you set the flooring directly into the wet adhesive — faster, but less room for repositioning. Follow the open-time window on the pail either way.
Not sure which product you need?
Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.