Call or Text: (647) 428-1111
BBSFLOORING
Mapei Ultrabond ECO 975 Standard Urethane Hardwood Adhesive — 4 gal
Mapei

Mapei Ultrabond ECO 975 Standard Urethane Hardwood Adhesive

4 gal

A standard urethane adhesive for gluing down engineered and solid hardwood flooring, sold in a 4 gallon pail.

$261.40/ gal
Ready for Markham pickup next business day

Free pickup in Markham (ready next business day) · GTA delivery $140

Works with
Engineered HardwoodSolid Hardwood

Specs

CategoryAdhesives & Primers
Unit sold4 gal
AvailabilityReady for Markham pickup next business day
Floor typesEngineered Hardwood, Solid Hardwood
CodeECO975-15

Documents & Downloads

Official Mapei documents for Mapei Ultrabond ECO 975 Standard Urethane Hardwood Adhesive — the same warranty, installation and technical sheets our installers work from. PDFs open in a new tab.

Need a document that isn't listed, or help reading a spec? Call (647) 428-1111 — we'll pull it from the manufacturer for you.

How to use Mapei Ultrabond ECO 975 Standard Urethane Hardwood Adhesive

  1. 1Make sure the subfloor is clean, dry, flat and free of dust, old adhesive, paint or sealers before you open the pail.
  2. 2Spread with the trowel notch size printed on the pail or bucket label for your specific flooring type — that’s set by the manufacturer for a reason and shouldn’t be guessed.
  3. 3Follow the open time and set method (pressure-sensitive vs. wet-set) on the label — setting your flooring too early or too late is the single most common glue-down install mistake.
  4. 4Roll the finished floor with a floor roller to fully seat it and push out trapped air.
  5. 5Hold off on heavy furniture and appliances until the adhesive has fully cured per the label’s cure schedule.

Related supplies

Henry 630 PeachPro Glue-Down Vinyl Adhesive
Henry 630 PeachPro Glue-Down Vinyl Adhesive
from $94.00
2 options
Henry 695 High-RH Vinyl Flooring Adhesive
Henry 695 High-RH Vinyl Flooring Adhesive
from $23.20
3 options
Henry 647 PlumPro Roll-Apply Vinyl Flooring Adhesive
Henry 647 PlumPro Roll-Apply Vinyl Flooring Adhesive
from $101.60
2 options
Henry 422 Fortify Wet-Set Vinyl-Backed Flooring Adhesive
Henry 422 Fortify Wet-Set Vinyl-Backed Flooring Adhesive
from $94.00
2 options

FAQ

Do I need a primer before using Mapei Mapei Ultrabond Eco 975 Standard Urethane Adhesive for Hardwood Flooring 4 gal?

On bare or porous concrete, yes — priming first lets the adhesive bond evenly instead of soaking in unevenly. On plywood or an already-sealed subfloor, a primer usually isn’t required. Check our Adhesives & Primers page for the matching primer.

Pressure-sensitive or wet-set — which method should I use?

Most modern flooring adhesives, including this one, can be used either way. Pressure-sensitive means you let the glue flash off until it’s tacky/clear before setting the flooring — more forgiving for DIY. Wet-set means you set the flooring directly into the wet adhesive — faster, but less room for repositioning. Follow the open-time window on the pail either way.

Not sure which product you need?

Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.

Try the supplies calculatorAsk about your project