Mapei Ultrabond ECO MS 4 LVT Professional Hybrid-Polymer Adhesive
A hybrid-polymer adhesive built specifically for LVT flooring, sold in 1 gallon and 4 gallon sizes.
Free pickup in Markham once it arrives (1–2 weeks) · GTA delivery $140
Specs
| Category | Adhesives & Primers |
| Size options | 1 gal · 4 gal |
| Unit sold | 1 gal (1 gal) |
| Availability | Order-in — usually 1–2 weeks |
| Floor types | Vinyl Flooring |
| Code | 94852-04 |
Documents & Downloads
Official Mapei documents for Mapei Ultrabond ECO MS 4 LVT Professional Hybrid-Polymer Adhesive — the same warranty, installation and technical sheets our installers work from. PDFs open in a new tab.
- TDSMAPEI Ultrabond ECO MS 4 LVT — Technical Data SheetEN · 6 pg · 1.4 MBPDF
- Technical Data Sheet (3585204)EN · 4 pg · 746 KBPDF
- SDSSafety Data Sheet (3585204)EN · 8 pg · 180 KBPDF
- Feuillet de sécurité (3585204) (FR)Français · 8 pg · 184 KBPDF
- CertCertification (3585204)EN · 5 pg · 320 KBPDF
- InfoInformation Document (3585204)EN · 2 pg · 351 KBPDF
Need a document that isn't listed, or help reading a spec? Call (647) 428-1111 — we'll pull it from the manufacturer for you.
How to use Mapei Ultrabond ECO MS 4 LVT Professional Hybrid-Polymer Adhesive
- 1Make sure the subfloor is clean, dry, flat and free of dust, old adhesive, paint or sealers before you open the pail.
- 2Spread with the trowel notch size printed on the pail or bucket label for your specific flooring type — that’s set by the manufacturer for a reason and shouldn’t be guessed.
- 3Follow the open time and set method (pressure-sensitive vs. wet-set) on the label — setting your flooring too early or too late is the single most common glue-down install mistake.
- 4Roll the finished floor with a floor roller to fully seat it and push out trapped air.
- 5Hold off on heavy furniture and appliances until the adhesive has fully cured per the label’s cure schedule.
Related supplies
FAQ
Do I need a primer before using Mapei Mapei Ultrabond ECO MS 4 LVT Professional Hybrid-Polymer Adhesive - 3.79 L?
On bare or porous concrete, yes — priming first lets the adhesive bond evenly instead of soaking in unevenly. On plywood or an already-sealed subfloor, a primer usually isn’t required. Check our Adhesives & Primers page for the matching primer.
Pressure-sensitive or wet-set — which method should I use?
Most modern flooring adhesives, including this one, can be used either way. Pressure-sensitive means you let the glue flash off until it’s tacky/clear before setting the flooring — more forgiving for DIY. Wet-set means you set the flooring directly into the wet adhesive — faster, but less room for repositioning. Follow the open-time window on the pail either way.
Not sure which product you need?
Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.