
AcoustiTECH VP Acoustic Underlayment
2.2 mm underlayment for engineered hardwood and laminate floors, covering 100 sq ft per roll.
Free pickup in Markham (ready next business day) · GTA delivery $140
Specs
| Category | Underlay & Acoustic Mats |
| Unit sold | 100 sqft |
| Availability | Ready for Markham pickup next business day |
| Coverage | ~100 sq ft per roll |
| Floor types | Laminate Flooring, Engineered Hardwood |
| Code | AT89922 |
Documents & Downloads
Official AcoustiTECH documents for AcoustiTECH VP Acoustic Underlayment — the same warranty, installation and technical sheets our installers work from. PDFs open in a new tab.
- InstallUser Guide Installation AcoustiTECH VP & Premium (2016)EN · 1 pg · 518 KBPDF
- Guide de l'usager Installation AcoustiTECH VP et Premium (2016) (FR)Français · 1 pg · 618 KBPDF
- TDSTechnical Data Sheet (89922)EN · 1 pg · 42 KBPDF
- Technical Data Sheet AcoustiTECH VP (2023)EN · 2 pg · 254 KBPDF
- Fiche Technique (89922) (FR)Français · 1 pg · 52 KBPDF
- Fiche Technique AcoustiTECH VP (2023) (FR)Français · 2 pg · 251 KBPDF
- SDSSafety Data Sheet AcoustiTECH VP (2016)EN · 4 pg · 54 KBPDF
- Feuillet de sécurité AcoustiTECH VP (2016) (FR)Français · 4 pg · 245 KBPDF
Show 2 more documents ↓Show fewer ↑
Need a document that isn't listed, or help reading a spec? Call (647) 428-1111 — we'll pull it from the manufacturer for you.
How to use AcoustiTECH VP Acoustic Underlayment
- 1Roll the underlay out across the room, foam/pad side down, butting each roll edge to the next without overlapping (unless the product specifically calls for an overlap).
- 2Tape the seams if the roll doesn’t already have a built-in adhesive strip.
- 3Trim it to the wall lines — your baseboard or shoe moulding will cover the cut edge.
- 4Install your floating floor directly on top, working from one wall across the room.
- 5Never double up two pads under one floor unless the flooring manufacturer specifically allows it — pad-on-pad can feel spongy and void a flooring warranty.
Related supplies
FAQ
Can I use this underlay under vinyl plank flooring?
Only if your vinyl doesn’t already have a pad attached — most vinyl (SPC/LVP) sold today does, and doubling up (pad-on-pad) can feel spongy or void the flooring warranty. Check your plank spec, or ask us and we’ll confirm.
How much AcoustiTECH VP Engineered & Laminate Acoustic Underlayment 36" x 33.3' - 2.2 mm (100 sqft) do I need?
Use the calculator on this page — enter your square footage and we’ll size the exact quantity, based on 1 roll covering about 100 sq ft.
Not sure which product you need?
Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.



