
Allglobe Silicone Moisture Barrier Underlayment
6 mil moisture barrier underlayment for solid and engineered wood floors and LVP, covering 400 sq ft per roll.
Free pickup in Markham once it arrives (2–4 business days) · GTA delivery $140
Specs
| Category | Moisture Barriers |
| Unit sold | 400 sqft |
| Availability | Order-in from our supplier’s Ontario warehouse — usually 2–4 business days |
| Coverage | ~400 sq ft per roll |
| Floor types | Laminate Flooring, Engineered Hardwood |
| Code | 70198XL |
Documents & Downloads
Official Allglobe documents for Allglobe Silicone Moisture Barrier Underlayment — the same warranty, installation and technical sheets our installers work from. PDFs open in a new tab.
- WarrantyWarranty Document Manufacturer's 1-Year Limited Warranty (2022)EN · 1 pg · 399 KBPDF
- InstallUser Guide Silicone Moisture Barrier Underlayment - Installation Instructions (2022)EN · 1 pg · 85 KBPDF
- TDSROBERTS - Silicone Moisture Barrier (400 sq. ft. Roll) 31.5" x 152.5' Technical Data SheetEN · 1 pg · 2.1 MBPDF
- ROBERTS - Silicone Moisture Barrier (400 sq. ft. Roll) 31.5" x 152.5' Fiche Technique (FR)Français · 1 pg · 2.1 MBPDF
- BrochureBrochure / Catalogue: SVS Silicone Vapor Shield Sell Sheet (AG-015 V6)EN · 1 pg · 735 KBPDF
Need a document that isn't listed, or help reading a spec? Call (647) 428-1111 — we'll pull it from the manufacturer for you.
How to use Allglobe Silicone Moisture Barrier Underlayment
- 1Make sure the subfloor is clean and dry before rolling the barrier out.
- 2Roll it out across the room, overlapping seams and sealing them per the product’s instructions.
- 3Run it slightly up the wall at the perimeter — your baseboard or shoe moulding will hide the excess.
- 4Avoid puncturing the barrier in the field; keep any fasteners to the very edge where trim will cover them.
- 5Install your new flooring directly over the sealed barrier.
Related supplies
FAQ
What moisture barrier thickness do I need over concrete?
6-mil poly (or thicker) is the standard minimum most independent flooring guides and manufacturers point to for laminate, SPC, and engineered wood over a concrete slab. Thinner film isn’t considered a real vapor barrier.
Do I still need underlay if I use a moisture barrier?
Usually yes for laminate — the moisture barrier blocks vapor from the slab, but most laminate still needs a separate underlay for cushioning and sound unless the barrier is combined with a pad (like our 3-in-1 rolls) or the plank has one attached.
How much Allglobe Silicone Moisture Barrier 400 sq. ft. 31.5" x 152.5 ft. x 6 mil Underlayment for Solid & Engineered Wood Floors & LVP do I need?
Use the calculator on this page — enter your square footage and we’ll size the exact quantity, based on 1 roll covering about 400 sq ft.
Not sure which product you need?
Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.



