Ardex Primer P-82 Two-Part Kit
A two-part Part A and Part B primer kit for demanding subfloor conditions ahead of levelling or patching work.
Free pickup in Markham (ready next business day) · GTA delivery $140
Specs
| Category | Adhesives & Primers |
| Unit sold | 1 gal kit |
| Availability | Ready for Markham pickup next business day |
| UPC | 709850210088 |
| Code | AR-P-82 |
Documents & Downloads
Official Ardex documents for Ardex Primer P-82 Two-Part Kit — the same warranty, installation and technical sheets our installers work from. PDFs open in a new tab.
- InstallInstallation Guide: ARDEX Technical Update 126 — ARDEX Underlayments and Non-Porous Substrates (max thickness & priming table, applies across K10/K13/K15/K22F/SD-P/FORTI FINISH)EN · 1 pg · 384 KBPDF
- TDSTechnical Data Sheet (12451)EN · 2 pg · 55 KBPDF
- Fiche Technique (12451) (FR)Français · 2 pg · 57 KBPDF
- SDSSafety Data Sheet (12451)EN · 14 pg · 286 KBPDF
- Feuillet de sécurité (12451) (FR)Français · 17 pg · 339 KBPDF
- BrochureBrochure (12451) (FR)Français · 1 pg · 1013 KBPDF
- SheetSales Sheet (12451)EN · 1 pg · 1007 KBPDF
- InfoInformation Document (12451)EN · 1 pg · 443 KBPDF
Need a document that isn't listed, or help reading a spec? Call (647) 428-1111 — we'll pull it from the manufacturer for you.
How to use Ardex Primer P-82 Two-Part Kit
- 1Confirm the substrate (concrete, wood, gypsum) is clean, dry and free of paint, sealers or curing compounds.
- 2Dilute or apply the primer per the ratio on the container — some primers are used neat, others are diluted with water.
- 3Apply in a thin, even coat with a roller or brush, avoiding puddles.
- 4Let it dry fully (most primers turn from milky to clear when ready) before pouring a leveler or spreading adhesive over it.
- 5Never apply your next product over wet or tacky primer — check the dry-time window on the label for the day’s temperature and humidity.
Related supplies
FAQ
Do I always need to prime before pouring a self-leveler?
On absorbent concrete, yes — nearly every self-leveling underlayment manufacturer requires a compatible primer first so the leveler doesn’t dry too fast at the surface and lose its bond. Skipping the primer is one of the most common causes of a self-leveler failing to bond.
Not sure which product you need?
Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.