
Polytarp Super Six Vapor Barrier
A 6 mil vapor barrier that protects laminate and engineered hardwood floors from below-slab moisture. Covers 1500 sq ft per roll at 10' x 150'.
Free pickup in Markham (ready next business day) · GTA delivery $140
Specs
| Category | Moisture Barriers |
| Unit sold | 1500 sqft |
| Availability | Ready for Markham pickup next business day |
| Coverage | ~1500 sq ft per roll |
| Floor types | Laminate Flooring, Engineered Hardwood |
| UPC | 773309600256 |
| Code | 66-0025 |
How to use Polytarp Super Six Vapor Barrier
- 1Make sure the subfloor is clean and dry before rolling the barrier out.
- 2Roll it out across the room, overlapping seams and sealing them per the product’s instructions.
- 3Run it slightly up the wall at the perimeter — your baseboard or shoe moulding will hide the excess.
- 4Avoid puncturing the barrier in the field; keep any fasteners to the very edge where trim will cover them.
- 5Install your new flooring directly over the sealed barrier.
Related supplies
FAQ
What moisture barrier thickness do I need over concrete?
6-mil poly (or thicker) is the standard minimum most independent flooring guides and manufacturers point to for laminate, SPC, and engineered wood over a concrete slab. Thinner film isn’t considered a real vapor barrier.
Do I still need underlay if I use a moisture barrier?
Usually yes for laminate — the moisture barrier blocks vapor from the slab, but most laminate still needs a separate underlay for cushioning and sound unless the barrier is combined with a pad (like our 3-in-1 rolls) or the plank has one attached.
How much Polytarp Vapor Barrier Super Six 10' x 150' - 6 mil (1500 sqft) do I need?
Use the calculator on this page — enter your square footage and we’ll size the exact quantity, based on 1 roll covering about 1500 sq ft.
Not sure which product you need?
Use our supplies calculator to get a full kit recommendation for your floor type and subfloor, or ask us directly.



